1.3 Inch OLED Displays

The 1.3 inch OLED display is a display made using organic electroluminescent diodes. Due to simultaneous self-emission, no backlight source, high contrast, thin thickness, wide viewing angle, fast response, flexibility for use in panels, wide temperature range, and simple construction and process are considered A new generation of flat-panel display emerging applications.

1.3 Inch OLED Displays Overview

The graphic 0.96 inch OLED display modules are made of 128×64 pixels,diagonal is only 0.96 inch. There are white on black color, black on white color, blue on black color, black on blue color, blue and yellow color for option. 

 Need a Competitive Quotation? Want to Get Free Samples? 

1.3 Inch OLED Displays Features

Support maximum 132 X 64 dot matrix panel
Embedded 132 X 64 bits SRAM
Operating voltage:
– Logic voltage supply: VDD1 = 1.65V – 3.5V
– DC-DC voltage supply: VDD2 = 3.0V – 4.2V
– OLED Operating voltage supply:
External VPP supply = 7.0V – 13.0V
Internal VPP generator = 7.4V – 9.0V
Maximum segment output current: 200μA
Maximum common sink current: 27mA
8-bit 6800-series parallel interface, 8-bit 8080-series
parallel interface, 3-wire & 4-wire serial peripheral
interface, 400KHz fast I2C bus interface
Programmable frame frequency and multiplexing ratio
Row re-mapping and column re-mapping (ADC)
Vertical scrolling
On-chip oscillator
Programmable Internal charge pump circuit output
256-step contrast control on monochrome passive OLED panel
Low power consumption
– Sleep mode: <5μA
– VDD1=0V,VDD2=3.0V – 4.2V: <5μA
– VDD1,2=0V,VPP=3.0V – 4.2V: <5μA
Wide range of operating temperatures: -40 to +85°C
Available in COG form, thickness: 300μm


ST-OLED013-1W is the graphic OLED display module made of 128×64 white OLED pixels,diagonal is only 1.3 inch.The controller ic SSD1306, communicates via 6800/8080 8-bit parallel and I2C/3-wire/4-wire serial interface,thanks to controller’s built-in voltage generation,only a single 3.3V power supply is needed. Because the display makes its own light, no backlight is required. This reduces the power required to run the OLED and is why the display has such high contrast,extremely wide viewing angle and extremely operating temperature.

The 1.3 inch OLED Displays are controlled by MCU such as 8051,PIC,AVR,ARDUINO,ARM and Raspberry Pi.It can be used in any embedded systems,industrial device,security,medical and hand-held device. 

1.3 Inch OLED Display Details

Packaging & Delivery

Selling Units: Single item

Single package size: 15X10X3 cm

Single gross weight: 0.01 kg

Package Type: 

Plastic Tray+Anti-Static Foam+Paper Card+Vacuum Bag+Carton.

Lead Time :

Quantity(Piece)1 – 1011 – 10001001 – 5000>5000
Est. Time(days)152530To be negotiated

1.3 Inch OLED Displays Application

Our 1.3 inch OLED Displays are widely used at consumer and industrial applications such as Audio, Automotive control panels, Medical devices, White goods or Home automation products, Smart Watch, Smart Bracelet, Device, Equipment, Printer, Projector, Scanner, Fax Machine, Copier, Bar Code Printer and etc. 

Click to view our products case study »

oled common applicaton

1.3 Inch OLED Arduino Displays

1.3 inch OLED Arduino is very popular application for the 1.3 inch OLED displays, it is also known for 1.3 inch OLED I2C Display, 1.3 inch OLED SPI Display or 1.3 inch OLED 128×64 SPI Display. If need Arduino 1.3 inch OLED I2C example, you can buy the I2C 1.3 inch OLED Display Module to test at first, you can check the 1.3 inch OLED datasheet above, and we can provide the 1.3 inch OLED I2C Arduino library for your projects.

Create Your Customized OLED DISPLAY Now! Need Support Team Help?

1.3 Inch OLED Displays Datasheet


Gross Weight (kg)0.0100
Continuity SupplyWe promise the long term continuity supply for this product no less than 10 years since 2015.
Part NumberST-OLED013-1W
Display Format128×64 Dots
Interface6800 8-bit Parallel , 8080 8-bit Parallel , I2C, 3-Wire Serial SPI, 4-Wire Serial SPI
IC or EquivalentSSD1306
AppearanceWhite on Black
Diagonal Size1.3“
Outline Dimension34.50(W)x23.00(H)x1.45(T)mm
Visual Area31.42×16.70mm
Active Area29.42(W)x14.70(H)mm
Character SizeNo
Dot (Pixel) Size0.21×0.21mm
Dot (Pixel) Pitch0.23×0.23mm
IC PackageCOG
Display TypeOLED
Touch Panel OptionalNo
Sunlight ReadableNo
Response Time(Typ)No
Contrast Ratio(Typ)10000:1
Viewing DirectionNo
Viewing Angle RangeFree
Backlight ColorNo
Backlight Current (Typ)No
Power Supply(Typ)2.8V
Supply Current for LCM(Max)No
Operating Temperature-40℃~70℃
Storage Temperature-40℃~85℃
Series NumberST-OLED013-1

Hot Sale OLED & LCD Displays

7 Inch IPS TFT LCD Display Module with 1024X600 Resolution
7 Inch TFT LCD Modules 800x480 Resolution with Capacitive Touch Screen
20x2 character OLED displays
I2C 20x2 OLED Character Display Serial Module,Yellow on Black
1.4 inch Graphic Display 128x64 LCD Module Serial SPI ST7565 Black on White
4.3 Inch Customized TFT LCD Display
4.3 Inch 480x272 Dots TFT LCD Display Modules with 24BIT RGB & Touch Panel
Monochrome Display 0.96"128x64 OLED Module,Blue and Yellow
16X2 1602 Big Character Display Outdoor 16 Pin Aip31066 Sunlight Readable Lcd Monitor
Character LCD Display KS0066 16x2 Module,Arduino,Black on YG
10.1 Inch TFT LCD Raspberry Pi Touch Screen w/Small HDMI Driver Board,1024x600
monochrome 320x240 graphic lcd display modules
5.7"320x240 Graphic LCD Display Modules arduino Touch Screen
custom low power lcd module 16 pin 6800 8-bit parallel SPI 3-wire I2C serial screen 20x2 character lcd display
3.3V or 5V LCD Display 20x2 Arduino Connection HD44780 I2C Character
3.2 Inch OLED displays
Serial OLED Module Cheap Price 3.2"Display 256x64 Screens White on Black
240x128 dots Graphic lcd display module 240128 LCD Panel
3.3"COG LCD Display 240x128 Graphic Module Black on White
high quality factory price LCM 5V STN Blue type character lcd display 2004 20x4 COB module
3.3V or 5V Blue LCD Display 20x4 Arduino Library Character Modules

Company Overview

Specialized in LCD, TFT, OLED and resistive & capacitive touch panel products.
8,000 square meters of factory workshop.
Over 400 employees, including15 R&D staff and 40 QC personnel.
CE, RoHS, TUV (SUD) certification of ISO9001:2008.

Factory Tour »

Our Products Quality Control System

Our OLED & LCD Displays quality standards holding the international Quality Certification for Total Quality Management (TQM)system which includes Quality Engineering(QE). Quality Auditing(QA). Incoming Quality Control(IQC), In-Process Quality Control(IPQC), Final Quality Control(FQC) and Outgoing Quality Control(OQC) to ensure our products quality. We are fully committed to offering RoHS compliance on the all products

LCD & OLED Quality Assurance

Our Service Advantages

1.Small order would be accepted.

2.Mass production lead time would be guaranteed.

3.Each order will have 0.2%-0.5% spare.

4.Even customers do not have a cooperation with us, we aslo can provide technical services.

5.If mass production has any quality problem, customer can return it.


1. What is the MOQ?
Re: No MOQ for samples,different MOQ requirements for bulk order.

2. What about the delivery time?
Re: For standard product,1 week for samples,4 weeks for bulk order;
For customization,3-4 weeks for samples,4 weeks for mass production after sample confirmation.

3. Is there any warranty for your products?
Re: Yes,we offer 12-month warranty for unartificial defect.

4. What is your shipping method?
Re: We can ship as buyer’s requirements,our suggestions:
For small quantity,ship by DHL/Fedex/TNT/EMS Express service,delivery time: 4-6 business days;
For large quantity,ship by sea transaportation or air transportation for saving shipping charge.

5. What is your payment method?
Re: We support make payment via TT/West Union/Paypal,50%-100% deposit in advance and balance before shipping as order amount.

6. Do you offer customization service?
Re: Yes,welcome OEM&ODM,please send us your requirements for assessment.

Have an interest in our products?

Contact us now!